Can I use wooden floors indoors and outdoors? The answer is yes, but special anti-corrosion flooring should be used. The wood used for anti-corrosion floor is treated by special process, so it is not only not afraid of water, but also has strong anti insect anti-aging ability. What materials are used for anticorrosive floor and how are they processed? How should the anti-corrosion floor be installed and what should be paid attention to in the process of use? Although the anti-corrosion floor is durable, it is economical to use it correctly.
Introduction to anticorrosive floor materials
The raw material used for anticorrosive floor is called anticorrosive wood, which is a kind of wood made by special processing. Ordinary wood cannot be used outdoors because of its poor waterproof and corrosion resistance. Even if it is used indoors, it should not be exposed to water in a large area at any time. But the anticorrosive wood is different. After the process treatment, it is completely not afraid of water, and the outdoor wind and rain can not damage it.
There are two treatment methods for anticorrosive wood. One is to dry all the water in the wood by baking at high temperature, and change some physical properties. In the future, it will not absorb water. Therefore, the firmness, waterproof and corrosion resistance have been improved. The other is to transform wood fiber through preservatives, which can also prevent mold breeding and ant eating, and can be used outdoors.
How to install anticorrosive floor
Anticorrosive wooden pavilion: the installation method of anticorrosive floor is basically the same as that of wooden floor. The keel shall be laid, and then the floor shall be laid on the surface. Therefore, before installation, the installation position and height shall be planned and measured accurately by level gauge and ruler.
When laying the keel, the height shall be determined according to the measured position. The spacing of each keel is usually 30cm. It should be noted that the direction of the keel should be opposite to that of the floor, that is, when the floor is laid horizontally, the keel is vertical.
After the keel is paved, use wood screws to fix the anti-corrosion floor and the Dragon diagram. In order to achieve the aesthetic effect, the surrounding of the floor should be wrapped and can be modified on site. After installation, it can be put into use.
Instructions for use of anticorrosive floor
For the anti-corrosion floor used outdoors, in order to achieve better decorative effect, another layer of anti-corrosion paint can be applied. This can make the anti-corrosion floor brighter, and the anti-corrosion and waterproof effect will be better.
Because the anti-corrosion floor is used outdoors, cracks or slight deformation will inevitably occur during use. These are normal phenomena and will not affect the strength and anti-corrosion performance of the anti-corrosion floor.
The anti-corrosion floor also needs maintenance, but its maintenance time is relatively long, and it can be done once a year and a half. The maintenance method is to use * * water-based paint to brush once.
The above is the introduction of Shandong antiseptic wood. Thank you for checking our company's information in your busy schedule. If you want to know more, you are welcome to call us for consultation http://www.jnajgc.com